Drawn glass and blown glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked:

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring at least 15.2 cm but not over 20.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring over 20.4 cm but not over 25.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

In airtight containers of glass or metal

In glass containers

Prepared pigments, prepared opacifiers and prepared colors, vitrifiable enamels and glazes, engobes (slips), liquid lustres and similar preparations, of a kind used in the ceramic, enamelling or glass industry; glass frit and other glass, in the form of powder, granules or flakes:

Glass frit and other glass, in the form of powder, granules or flakes:

Polishes and creams, for footwear, furniture, floors, coachwork, glass or metal, scouring pastes and powders and similar preparations (whether or not in the form of paper, wadding, felt, nonwovens, cellular plastics or cellular rubber, impregnated, coated or covered with such preparations), excluding waxes of heading 3404:

Having a light-reflecting surface produced in whole or in part by glass grains (ballotini)

Having a light-reflecting surface produced in whole or in part by glass grains (ballotini)

Ice bags; douche bags, enema bags, hot water bottles, and fittings therefor; invalid and similar nursing cushions; dress shields; pessaries; prophylactics; bulbs for syringes; syringes (other than hypodermic syringes) and fittings therefor, not in part of glass or metal

Vegetable parchment, greaseproof papers, tracing papers and glassine and other glazed transparent or translucent papers, in rolls or sheets:

Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)

Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)

Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)

Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)

Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)

Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)

Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)

Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)

Cullet and other waste and scrap of glass, excluding glass from cathode-ray tubes or other activated glass of heading 8549; glass in the mass:

Of other glass having a linear coefficient of expansion not exceeding 5 x 10^-6 per Kelvin within a temperature range of 0˚C to 300˚C

Cast glass and rolled glass, in sheets or profiles, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked:

Drawn glass and blown glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked:

Other glass:

Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked:

Nonwired glass, having an absorbent, reflecting or non-reflecting layer:

Wired glass

Safety glass, consisting of toughened (tempered) or laminated glass:

Multiple-walled insulating units of glass

Carboys, bottles, flasks, jars, pots, vials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass:

Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for electric lamps and light sources, cathode-ray tubes or the like:

Monochrome glass envelopes, the foregoing certified by the importer as being for actual use in automatic data processing machine data or graphic display cathode ray tubes

Of glass-ceramics:

Of glass having a linear coefficient of expansion not exceeding 5 x 10^-6 per Kelvin within a temperature range of 0˚C to 300˚C:

Glassware decorated with metal flecking, glass pictorial scenes or glass thread- or ribbon-like effects, any of the foregoing embedded or introduced into the body of the glassware prior to its solidification; millefiori glassware; glassware colored prior to solidification, and characterized by random distribution of numerous bubbles, seeds or stones, throughout the mass of the glass

Smokers' articles; perfume bottles fitted with ground glass stoppers

Signaling glassware and optical elements of glass (other than those of heading 7015), not optically worked:

Clock or watch glasses and similar glasses, glasses for noncorrective or corrective spectacles, curved, bent, hollowed or the like, not optically worked; hollow glass spheres and their segments, for the manufacture of such glasses:

Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or molded glass, whether or not wired, of a kind used for building or construction purposes; glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes; leaded glass windows and the like; multicellular or foam glass in blocks, panels, plates, shells or similar forms:

Glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes

Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or molded glass

Laboratory, hygienic or pharmaceutical glassware, whether or not graduated or calibrated:

Of other glass having a linear coefficient of expansion not exceeding 5 x 10^-6 per Kelvin within a temperature range of 0°C to 300°C

Microscope slides and micro cover glasses

Glass beads, imitation pearls, imitation precious or semiprecious stones and similar glass smallwares and articles thereof other than imitation jewelry; glass eyes other than prosthetic articles; statuettes and other ornaments of lamp-worked glass, other than imitation jewelry; glass microspheres not exceeding 1 mm in diameter:

Glass beads, imitation pearls, imitation precious or semiprecious stones and similar glass smallwares:

Glass fibers (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics):

Glass wool and articles of glass wool:

Other articles of glass:

Handtools (including glass cutters) not elsewhere specified or included; blow torches and similar self-contained torches; vises, clamps and the like, other than accessories for and parts of machine tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof:

Calendering or other rolling machines, other than for metals or glass, and cylinders therefor; parts thereof:

Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass:

Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware; parts thereof:

Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes

Of machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes

Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics:

Molds for glass

By plaster, cement, ceramics or glass deposit

Mica, ceramic or glass dielectric

Lamps having glass envelopes not over 6.35 mm in maximum diameter and suitable for use in cystoscopes and other surgical instruments

Of glass

Containing primary cells, primary batteries, electric accumulators, mercury-switches, glass from cathode-ray tubes or other activated glass, or electrical or electronic components containing cadmium, mercury, lead or polychlorinated biphenyls (PCBs)

Containing primary cells, primary batteries, electric accumulators, mercury-switches, glass from cathode-ray tubes or other activated glass, or electrical or electronic components containing cadmium, mercury, lead or polychlorinated biphenyls (PCBs)

Containing primary cells, primary batteries, electric accumulators, mercury-switches, glass from cathode-ray tubes or other activated glass, or electrical or electronic components containing cadmium, mercury, lead or polychlorinated biphenyls (PCBs)

Optical fibers and optical fiber bundles; optical fiber cables other than those of heading 8544; sheets and plates of polarizing material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked:

Spectacle lenses of glass

Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked; parts and accessories thereof:

Safety glasses or safety goggles

Hand magnifiers, magnifying glasses, loupes, thread counters and similar apparatus

Of glass:

Prisms and other glass articles of a kind used in chandeliers and wall brackets, and articles thereof

Of glass

Of glass

Of glass

Vacuum flasks and other vacuum vessels, complete; parts thereof other than glass inners:

Painted, colored or stained glass windows and parts thereof, all the foregoing valued over $161 per square meter and designed by, and produced by or under the direction of, a professional artist

Pepperoncini, prepared or preserved by vinegar or acetic acid and presented in glass jars (provided for in subheading 2001.90.38)

Pepperoncini, prepared or preserved by vinegar or acetic acid and presented in containers other than glass jars (provided for in subheading 2001.90.38)

Olives, green in color, stuffed with minced pimiento, the foregoing in brine and presented in glass containers, other than place packed (provided for in subheading 2005.70.25)

Fritted barium borosilicate glass with a mean particle size between 0.4 and 10 microns, Young's modulus of 71GPa, a density of 2.8 grams per cubic centimeter, radiopacity of 4.2, a refractive index of 1.53, and chemical composition of 55 percent silicon dioxide, 25 percent barium oxide, 10 percent boron trioxide and 10 percent aluminum oxide by weight (provided for in subheading 3207.40.10)

Poly(ethylene-ran-(2-norbornene)) (CAS No. 26007-43-2), comprising 64 (plus or minus 3) percent by weight ethylene (CAS No. 74-85-1), having a glass transition temperature of 78 (plus or minus 4) °C, and containing not less than 3 percent by weight polyethylene (CAS No. 9002-88-4) (provided for in subheading 3911.90.90)

Mounting frame enclosures for digital still image video cameras of subheading 8525.80.40, incorporating openings for camera microSD, micro HDMI and USB ports, camera latching mechanism, and glass protective screen (provided for in subheading 3926.90.99)

Camera cases of transparent polycarbonate plastics, designed to encase cameras of subheading 8525.80.40; each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m, a flat and optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).

Cases of clear polycarbonate plastics, designed for use with cameras of subheading 8525.80.40 to affix camera to the user's wrist; such housings waterproof at a depth up to 60 m, each incorporating buttons for operation of the camera, a silicon gasket designed for waterproofing, a flat and optically-coated glass lens, an aluminum heat sink and adjustable neoprene/hook and loop closures on its wrist straps (provided for in subheading 4202.99.90).

Camera cases with outer surface of transparent molded polycarbonate plastics, designed for cameras of subheading 8525.80.40; the foregoing each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of not more than 40 m, a flat, optically-coated, glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90)

Camera cases of molded polycarbonate plastics, such cases designed to hold cameras of subheading 8525.80.40, each case incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount that allows adjustment of the viewing angle on a pivot, a flat and optically-coated glass lens and open spaces that allow air and sound to enter (provided for in subheading 4202.99.90).

Camera cases designed to contain cameras of subheading 8525.80.40; such cases of opaque molded polycarbonate plastics in a solid color and with nonreflective surface; each incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount designed to facilitate the adjustment of its viewing angle on a pivot, a silicon gasket in the door of the housing designed to allow for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m; each incorporating a flat, optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).

Wired rolled glass, surface ground and polished but not further worked, presented in rectangular shapes and with a thickness of 6.35 mm or more, designed to retain glass fragments within wired sashes when shattered due to exposure to fire or impact (provided for in subheading 7005.30.00)

Discs of drawn glass, each measuring between 1.4 m and 1.7 m in diameter, between 40 and 50 mm in thickness and between 200 and 250 kg in weight, the foregoing having been machined so as to render one surface concave in shape and the opposite surface convex in shape, the foregoing not framed or fitted with other materials and not designed to manipulate light to create an optical effect (provided for in subheading 7006.00.40)

Tempered glass covers for cooking ware, such covers produced by automatic machine (provided for in subheading 7010.20.20)

Kitchenware of glass-ceramics, non-glazed and greater than 75 percent by volume crystalline (provided for in subheading 7013.10.10)

Opaque cooking ware of glass-ceramics (provided for in subheading 7013.10.50)

Sets of coasters of glass, not pressed or toughened (specially tempered), each printed with a cross-sectional image of an object after formation of the glass which, when the coasters in any set are stacked, depict a three-dimensional image of such object; each coaster with attached protective rubber feet and valued over $0.30 each but not over $3 each (provided for in subheading 7013.99.50)

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring at least 15.2 cm but not over 20.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring over 20.4 cm but not over 25.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

Mouth-blown decorative figures of birds, of glass, valued over $15.00 each and identifiable by a pontil mark (provided for in subheading 7013.99.90)

Chopped strands of glass, of a length greater than 50 mm, containing over 90 percent silica by weight (provided for in subheading 7019.19.30)

Slivers of glass, containing over 90 percent silica by weight (provided for in subheading 7019.19.90)

Liquid-filled glass bulbs designed for use in sprinkler systems and other release devices (provided for in subheading 7020.00.60)

Electromechanical burr coffee grinders, with self-contained electric motor, each presented with one clear glass top storage vessel and one clear glass bottom storage vessel (provided for in subheading 8509.40.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 48 liters but not exceeding 49 liters, the foregoing containing a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm and with a door having an exterior molded plastic handle (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 48 liters but not exceeding 49 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm and a door with exterior metal handle (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 53 liters but not exceeding 55 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having an oven capacity of greater than 58 liters but not exceeding 60 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 32 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having an oven capacity of greater than 58 liters but not exceeding 60 liters, the foregoing having a glass turntable plate with a diameter greater than 35 cm but not exceeding 37 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity of greater than 53 liters but not exceeding 55 liters, the foregoing having a glass turntable plate with a diameter greater than 35 cm but not exceeding 37 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity of 56 liters or more but not over 58 liters, having a glass turntable plate with a diameter measuring 30 cm or more but not over 31 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity of greater than 56 liters but not exceeding 58 liters, the foregoing having a glass rectangular turntable plate (provided for in subheading 8516.50.00)

Electrothermic tea kettles, of a kind used for domestic purposes, each with clear glass chamber, having a stainless steel tea steeper and hinged metal limescale filter, the foregoing having a base containing a temperature control lever (provided for in subheading 8516.71.00)

Electrothermic slow cookers of a kind used for domestic purposes with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cooker having five cooking functions (slow cook, brown and saute, steam, bake and roast) controlled by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cookers having three cooking functions (bake, saute and slow cooking) operated by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Light emitting diode (LED) motion-activated security lantern kits, of a kind used for exterior lighting, such lanterns of base metal and having antique bronze finish, each with frosted glass, with an integrated photocell and motion sensor, and with a wall mounting bracket (provided for in subheading 9405.40.60)

Emergency lights, of base metal other than of brass, round or elongated in shape, measuring between 6 and 12 cm in height, each containing incandescent lamp, lamp holder, reflector, clear glass lens with drain hole, pressure can and electrical pigtail with connector; the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating egress paths on or around the aircraft during an emergency evacuation (provided for in subheading 9405.40.60)

Clear or frosted columnar globes or shades, certified by the importer as of extruded borosilicate glass; the foregoing measuring 2.54 cm or more but not over 30.48 cm in length and 2.54 cm or more but not over 20.32 cm in diameter, each with circular openings at the top and bottom, designed for use on portable non-electrical lanterns for outdoor use (provided for in subheading 9405.91.40)

Insulated coffee servers, each with exterior of stainless steel and vacuum liner of glass and a hinged brew-through lid with push-button dispensing; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)

Coffee servers, each with exterior of stainless steel, vacuum glass liner, a hinged brew-through lid with top lever style pump and swivel base; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)

Vacuum coffee servers, each with lining of glass, a plastic exterior, top carrying handle, see-through contents window and a brew-through lid; the foregoing with a capacity over 2 liters (provided for in subheading 9617.00.40)

Olives, prepared or preserved, in brine, not ripe and not pitted or stuffed, not green in color and not packed in airtight containers of glass, metal, or glass and metal (provided for in subheading 2005.70.75)